Call Us Today! 1.855.558.1001|info@triadrf.com
  • PermalinkGallery

    Triad Ships S-Band to X-Band Frequency Translating CubeSat/NanoSat Amplifier

Triad Ships S-Band to X-Band Frequency Translating CubeSat/NanoSat Amplifier

The TFTA1003 is a small form factor, lightweight circuit card amplifier that has been designed to be integrated into existing CubeSat and NanoSat satellite systems.

Up-converting from S-Band in order to communicate with existing X-Band Systems, the TFTA1003 can be easily integrated into existing systems with minimal equipment changes. This amplifier also offers up to 4W of output power to ensure proper communication while operating in Low Earth orbit (LEO).

Smaller than a credit card and weighing in at less than a half an ounce, the TFTA1003 is perfect for applications where small size and light weight is critical.

With a voltage input range of +10 to +14 VDC, the TFTA1003 is versatile enough to operate on a range of available voltage buses typically found on a CubeSat chassis.

More information on this amplifier can be found here: TFTA1003

By |December 11th, 2018|PA|0 Comments

Triad Designs and Ships 4 Watt UHF CubeSat/NanoSat Amplifier

The TA1120 is a small form factor, lightweight circuit card amplifier that has been designed to be integrated into existing CubeSat and NanoSat satellite systems.

Operating from 380 to 470 MHz, the TA1120 is compatible with most UHF transmitters. This amplifier also offers up to 4W of output power to ensure proper communication while operating in Low Earth orbit (LEO).

Weighing in at less than a half an ounce and smaller than a credit card, the TA1120 is perfect for applications where small size and light weight is critical.

With a voltage input range of +9 to +14 VDC, the TA1120 is versatile enough to operate on a range of available voltage buses typically found on a CubeSat chassis.

Additional information on this amplifier can be found here: TA1120

By |November 20th, 2018|PA|0 Comments

Triad Ships 50 Watt Low-SWaP L-Band Power Amplifier

The all new TA1017 is a 50 Watt, L and S band power amplifier that offers impressive power in a small and lightweight package, making it ideal for, but not limited to DBV-T applications.

The TA1017 is also an excellent choice for LTE, WiFi, and any other L or S band application where small size and high output power are essential.

Please see the TA1017 web page for more information:

Triad RF Systems TA1017

Triad Ships 10W Peak C-Band Rugged Amplifier

The TA4002R is a 10 Watt peak C-Band ruggedized power amplifier, housed in a compact but durable IP67 rated enclosure. This makes the TA4002R ideal for many outdoor applications, such as mast or tower mount locations, as well as on an aircraft. The TA4002R also draws a very conservative 1.2 A of current at 12V while providing over 2 Watts of OFDM power.

More information on the TA4002R can be found here.

Triad Continues Production of 50 Watt High-Efficiency C-Band GaN Amplifier

Triad RF introduces another state-of-the-art GaN amplifier, the TA1203. The unit operates from 4.4 GHz to 5.0 GHz, has 44 dB of gain, and produces over 50W PSat! DC input voltage can vary from +10 to +14 V and only draws 8 A at peak power. This results in a powerful amplifier that is 47% efficient. The module measures 6.1 x 3.3 x 0.8 inches and is in stock.

More information here: TA1203

Triad Introduces 20-1000 MHz JTRS Power Amplifier

The TA1056 is a compact and powerful broadband power amplifier designed for use with JTRS Military Radio Communications, as well as any other applications that require operation over a broad spectrum. This amplifier also boasts 40W of output power for long range communication capability.

More information on the TA1056 can be found here.

By |January 10th, 2018|PA|0 Comments

New Triad CubeSat/NanoSat Amplifier Destined for Space

Triad has designed and launched the new TA1109, a small form factor circuit card amplifier designed to be integrated into CubeSat and NanoSat satellite systems. Weighing in at less than a half an ounce, the TA1109 is perfect for applications where small size and weight reduction is critical. Operating at 2000-2500 MHz, the TA1109 offers up to 4W of output power, with a voltage input range of +9 to +14 VDC.

More information on the TA1109 can be found here.

Triad Designs and Ships GaN ENG Broadcast Amplifier

The new TA1205 is a GaN amplifier that operates at 3000-3600 MHz and offers an output power of up to 10 Watts. It boasts a small form factor and light weight, while keeping a high power output which makes it ideal for ENG Broadcast applications where distance and mobility is key.

More information on the TA1205 can be found here:

TA1205

Triad Designs Solid State Power Amplifier (SSPA) for CubeSat and NanoSat Systems

The TA1181 has been designed for use from 400 to 450 MHz, and is typically used in but not limited to CubeSat and NanoSat GCS (Ground Station) applications. This amplifier module has a maximum out power of 158 Watts and can be used with a multitude of waveforms, from GMSK/BPSK up to highly modulated signals such as 64QAM and 256QAM for higher data rate applications.
This unit features high speed on/off control, over and under voltage protection, and temperature monitoring all packed into a small form factor.

More details can be found here: TA1181 Datasheet

To request more information or a quote please contact sales: [email protected]

Triad RF Systems Designs Bench-Top Lab Unit for Leading Particle Physics Laboratory.

This lab unit is capable of a power output of 30 Watts and operates at a frequency range from 1200 MHz to 1400 MHz. The compact and rugged design of this system is ideal for bench-top testing and many other applications where both simplicity and portability are required.
Triad offers a wide variety of solutions as they are able to integrate any of their current amplifier products in a bench-top system. In addition they offer different styles of lab units ranging from small simple designs to touch screen enabled, feature packed designs.