Call Us Today! 1.855.558.1001|info@triadrf.com

Ultra-Linear Amps

What sort of heat-sinking / cooling methods are required on Triad RF module-form products?

Many of our product lines come equipped with sufficient heat-sinking for operation without the need for cooling fans under lab/bench-top conditions. A “max convection cooled ambient temperature” specification is provided for all products that have heat-sinks integrated into their housings. When operating above that maximum, sufficient airflow will be required to keep the unit within its safe operating temperature range. Consult your Triad RF sales representative or technician for documentation that will guide you on how much airflow will be required for your application.

By |February 24th, 2015||0 Comments

What types of radios are Triad RF products compatible with?

Triad RF products are compatible with almost every commercial TDD or FDD radio system utilizing any type of modulation, from single carrier CW/FM to high peak to average OFDM signals such as 802.11, 802.16 and DVB. The PA module is modulation agnostic and its pre-distortion circuitry will automatically adapt its correction coefficients for optimal linearity. The only precautions that need to be observed are as follows:
a. Ensuring that the input power to the module is at or below the maximum input level specified on the spec sheet.
b. Check that the module is powered by a DC supply that has enough wattage output to ensure that the DC voltage does not drop below the minimum input voltage on the spec sheet.

By |February 24th, 2015||0 Comments