Call Us Today! 1.855.558.1001|


Triad Receives Order for Linear Wideband Amplifier

Triad RF receives an order for several wideband linear power amplifiers. The TA1148 operates from 800 MHz to 2.5 GHz and produces more than 10W of power at P1dB. The unit is linear enough to produce 4W to 5W of LTE power. The +12V amplifiers will be used in commercial data links and further orders are expected at the end of Q1, 2016.

December 4th, 2015|Linear PA, Wideband|

Triad RF Ships Tower Mount 4 GHz Bi-Directional Amplifiers

Triad RF ships several TTRTM1082 tower mount 4 GHz bi-directional amplifiers to a military customer. The auto-switching amplifiers will increase the distance the high speed data link can travel to aircraft and people in the targeted vicinity. The units are built to meet an IPC67 rating, have a built-in A/C power supply and an LED indicator for TX, RX and Fault. Specific mounting holes allow them to be attached to a pole up to 3 inches in diameter.

November 23rd, 2015|BDA, Tower Mount|

Triad RF Ships L-Band BDAs to European Surveillance Customer

Triad RF ships several L-Band bi-directional amplifiers to a European surveillance customer. The units were equipped with auto-switching which allows the amplifier to turn to TX mode when RF is detected from the radio. When RF is no longer detected, the unit switches back to RX mode. Switching from one mode to the other is done under 2 usec to insure no data is lost in either path. Follow on orders are expected in 2016.

November 18th, 2015|BDA|

Triad RF order to Develop Linearized 1.9 GHz LTE/WCDMA Amplifier

Triad RF received a development order for high linear LTE/WCDMA amplifiers to cover the 1.9 GHz band. The amplifier will implement the latest GaN devices on the market as well as its closed loop pre-distortion circuits. This stand-alone 100 Watt module will be used to transmit WiFi signals from trains to base-stations along the train route. Triad’s amplifier expertise along with it’s customer service secured this order.

October 28th, 2015|Linear PA|

Triad RF ships DUAL BDAs to Meet Urgent Demand

Triad RF shipped two DUAL S-Band bi-directional amplifiers (BDAs) one day after receipt of order. The customer had an immediately need for the MIMO amplifiers and we were able to deliver due to available inventory. The quick delivery allowed the end customer to use the high power radio system successfully and complete their mission.

Trying to have some stock at all times is very important to us. We know in this “need by yesterday world” a company’s ability to deliver quickly is the difference between getting an order and losing an order. We plan on expanding this mentality by opening a Triad RF Store in the beginning of 2016.

October 25th, 2015|BDA|

Triad RF Receives More Orders of Wideband Amplifiers from Tier 1 Test Equipment Manufacturer

Triad RF has received more orders for its new TA1164-HS which operates from 900 to 6000 MHz with 20W peak power. The RoHs compliant unit is used in semiconductor test systems for next generation wireless networking ICs. Both GaAs and GaN FETs were utilized to achieve the customer’s dual-use requirements for a low EVM, multi-octave BW amplifier that was also capable of higher power output for CW signals at saturation. Higher production orders are expected in Q1 2016.

October 7th, 2015|PA, Wideband|

Triad RF ships 4 GHz Bi-Directional Amplifiers to Defense Contractor

Triad RF ships their high power 4 GHz bi-directional amplifier to a top tier defense contractor for testing with their radios. The amplifiers will be evaluated to see how far the present range can be extended and how to integrate the units with their present line of radios. Tests will be completed in Q4 with possible future tests in Q1.

October 2nd, 2015|BDA|

Triad RF Receives a Development Order for 500 MHz to 18 GHz Bench Top Amplifier

Triad RF received a development order for a 1 Watt Bench Top amplifier that operates from 500 MHz to 18 GHz. The unit will run off of 110 VAC and be internally cooled. The amplifier will be used in a test system by a major component manufacturer. Delivery is expected mid Q1 2016.

September 18th, 2015|Custom Systems, Wideband|

Triad RF receives production order for its 400 MHz Bi-Directional Amplifier

Triad RF receives a production order for the TTRM1076. The bi-directional amplifier will increase the linear power of related MIMO radios and will be used in the Far East. The MOSFET unit operates from 400 MHz to 450 MHz and produces over 50W of peak power.  It also produces over 16W (more…)

September 16th, 2015|BDA|

50 W, 6.4-7.2 GHz, GaN amplifier ships to customer

Triad RF ships an initial order for the TA1030. The GaN unit operates from 6400 MHz to 7200 MHz and produces over 50W of peak power.  It also produces over 10W (more…)

September 4th, 2015|PA|